H3c-technologies H3C SecPath F5000-A5 Firewall User Manual download pdf (Page 53)

Ste

Command

3. Enable the none authentication mode.

authentication-mode none

4. Specify the user privilege level 3.

user privilege level 3

To log in to the CLI through the AUX port, connect a terminal to the AUX port by using a console cable

and follow the steps for logging in through the console port.

Performing basic configurations

To enable the firewall to communicate with other devices on the network, you must perform some basic

configurations on the firewall. To do so, first log in to the CLI or Web interface of the firewall.

To use an interface as a service interface, you must add it to a non-management security zone and

configure the security policy before configuring relevant service functions. For more information, see the

firewall configuration guides and command references.

This section describes the steps for performing basic configurations on the firewall. For how to configure

protocols and features on the firewall, see the firewall configuration guides.

The syntax of commands and the Web interface vary with software versions.

Performing basic configurations at the CLI

Ste

Command

Remarks

1. Enter system view.

system-view N/A

2. Set the system name.

sysname sysname By default, the system name is H3C.

3. Enable the Telnet server.

telnet server enable

By default, the Telnet server is

disabled.

4. Enter Ethernet interface view.

interface interface-type

interface-number

N/A

5. Assign an IP address to the

interface.

ip address ip-address

{ mask-length | mask } [ sub ]

By default, only M-GigabitEthernet

0/0 has an IP address

(192.168.0.1).

6. Configure dynamic NAT.

• To create a NAT address

group:

nat address-group

group-number start-address

end-address [ level level ]

• To associate the ACL to the

address group:

nat outbound acl-number

[ address-group group-number

[ vpn-instance

vpn-instance-name ] [ no-pat |

port-preserved ] ] [ track vrrp

virtual-router-id ]

N/A

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 120 121

Comments to this Manuals

No comments

H3c-technologies H3C SecPath F5000-A5 Firewall User Manual Page 53

Comments to this Manuals

Related products and manuals for Safety H3c-technologies H3C SecPath F5000-A5 Firewall