H3c-technologies H3C SecPath F5000-A5 Firewall User Manual Page 46

  • Download
  • Add to my manuals
  • Print
  • Page
    / 121
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 45
36
Figure 31 Connecting the terminal to the firewall
(1) Console port (2) RJ-45 connector
(3) Console cable
IMPORTANT:
Identify the mark on the console port and make sure you are connecting to the correct port.
The serial ports on PCs do not support hot swapping. If the firewall has been powered on, always
connect the console cable to the PC before connecting it to the firewall, and when you disconnect the
cable, first disconnect it from the firewall.
Configuring communication parameters on the terminal
1. On the PC, select Start > Programs > Accessories > Communications > HyperTerminal.
2. Enter a name for the connection and click OK.
Page view 45
1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 120 121

Comments to this Manuals

No comments