H3c-technologies H3C SecPath F5000-A5 Firewall User Manual download pdf (Page 58)

Table 8 Configuration items

Item Descri

tion

IP Configuration

Select an IP address acquisition approach for the

interface:

• None—Assigns no IP address to the interface.

• Static Address—If you select this option, you must

manually assign an IP address and a mask to the

interface.

• DHCP—Enables the interface to automatically

obtain an IP address through the DHCP protocol.

• Do not change—Leaves the IP address of the

interface unchanged.

IMPORTANT:

Changing the IP address of

the interface you are using

disconnects you from the

firewall.

IP Address Configure an IP address and a mask for the interface.

These two fields are available only when the value of

the IP Configuration field is Static Address.

Mask

Configuring NAT

1. Click Next on the interface IP address configuration page to enter the NAT configuration page.

Figure 42 Basic configuration wizard—5/6 (NAT configuration)

2. Complete NAT configuration as described in Table 9.

Table 9 Configuration items

Item Descri

tion

Interface

Select the interface to which the NAT configuration will be applied, typically the

outbound interface of the firewall.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 120 121

No comments

H3c-technologies H3C SecPath F5000-A5 Firewall User Manual Page 58