H3c-technologies H3C SecBlade IPS Cards User Manual download pdf (Page 44)

To do… Use the command…

Remarks

Set the SNMP version

snmp-agent sys-info

{ contact sys-contact |

location sys-location |

version { all | { v1 | v2c

| v3 }* } }

Required

Currently, the SecBlade IPS card only supports

SNMPv3.

By default, SNMPv3 applies.

Configure a new SNMP group

and configure its access right

For SNMP v3:

snmp-agent group v3

group-name

[ authentication |

privacy ] [ read-view

read-view ] [ write-view

write-view ]

[ notify-view

notify-view ] [ acl

acl-number ]

Required

By default, the SNMP group configured with

the snmp-agent group v3 command adopts

non-authentication and non-encryption.

Create or update a MIB view to

specify the MIB objects that the

NMS can access

snmp-agent mib-view

{ excluded | included }

view-name oid-tree

[ mask mask-value ]

Required

The default view is ViewDefault.

Add a user to the SNMP group

snmp-agent usm-user

v3 user-name

group-name [ [ cipher ]

authentication-mode

{ md5 | sha }

auth-password

[ privacy-mode { des56

| aes128 }

priv-password ] ] [ acl

acl-number ]

Required

If you execute this command for the same user

repeatedly, the last configuration takes effect.

Enable the ACFP server acfp server enable

Required

Disabled by default.

Enable the ACSEI server acsei server enable

Required

Disabled by default.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 84 85

Comments to this Manuals

No comments

H3c-technologies H3C SecBlade IPS Cards User Manual Page 44

Comments to this Manuals

Related products and manuals for Safety H3c-technologies H3C SecBlade IPS Cards