H3c-technologies H3C SecBlade IPS Cards User Manual download pdf (Page 20)

To do… Use the command… Remarks

Use the IP address of the

management interface to

the SecBlade IPS card

—

Required

The default username and

password are both admin.

Configure the

OAA client

and internal

interface

Select System Management > Device

Management > OAA Configuration. Input

parameters in OAA Client Configuration

and Internal Interface Configuration to

complete OAA configuration.

Required

Configure

OAA

Test the

connectivity

Click the Test Connectivity button to test

the connectivity between the OAA client

and the server.

Required

Create security zones

Select System Management > Network

Management > Security Zone. Use the

Add button to create security zones and

add the interfaces of the S5800/S5820X

switch to the security zone.

Required

The interface list of the switch is

sent to the OAA board (the

SecBlade IPS card in this case),

and you can add interfaces to

security zones.

Create a segment

Select System Management > Network

Management > Segment Configuration.

Click Add Segment. Select a segment

number, the internal zone, and the

external zone.

Required

You need to specify the internal

interface when creating the

segment. The internal interface

connects to the switch.

Displaying the configuration

After completing above configurations, you can use the display command in any view of the SecBlade

IPS card to view forwarding information on the internal 10GE interface and verify you configurations.

To do… Use the command…

Display the running status and forwarding

information of the 10GE interface

display interface [ interface-name ]

Use the following commands on the switch to display ACFP information.

To do… Use the command…

Display the ACFP server information display acfp server-info

Display the ACFP client information display acfp client-info [ client-id ]

Display the ACFP policy information

display acfp policy-info [ client client-id [ policy-index ] |

dest-interface interface-type interface-number | global |

in-interface interface-type interface-number | out-interface

interface-type interface-number ] [ active | inactive ]

Display the ACFP rule information

display acfp rule-info { global | in-interface [ interface-type

interface-number ] | out-interface [ interface-type

interface-number ] | policy [ client-id policy-index ] }

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 84 85

Comments to this Manuals

No comments

H3c-technologies H3C SecBlade IPS Cards User Manual Page 20

Comments to this Manuals

Related products and manuals for Safety H3c-technologies H3C SecBlade IPS Cards