H3c-technologies H3C SecBlade IPS Cards User Manual download pdf (Page 15)

Figure 3 web interface login interface

By default, the IPS card has HTTPS enabled, but does not have HTTP enabled. Therefore, for the first login,

only the HTTPS method is available. After the first login through HTTPS, you can enable HTTP as follows:

select System Management > Network Management > Management Interface from the navigation tree

to enter the page shown in

Figure 4.

Figure 4 HTTP/HTTPS configuration

Select the checkbox before HTTP and click Apply. A confirmation dialog box pops up, showing

“Changing the IP address of the management interface may break the network connection. Continue?”.

Click OK on the dialog box to complete configuration.

WARNING!

• The PC in

Figure 2 is a common configuration terminal and is not required to be a web network

management terminal.

• Do not log in to the web interface through both HTTP and HTTPS at the same time from a PC.

After the first login, H3C recommends changing the default password. For more information, see

User

Management

in the

H3C Intrusion Prevention System Web-Based Configuration Guide.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 84 85

No comments

H3c-technologies H3C SecBlade IPS Cards User Manual Page 15