H3c-technologies H3C SecBlade IPS Cards User Manual download pdf (Page 23)

Figure 7 Configure the OAA client

After completing configuration, click Test. If the following message appears, the switch is reachable.

Figure 8 Connectivity test result

# Configure security zones.

After completing OAA configuration on the SecBlade IPS card and the S5800/S5820X, you can add

any physical ports of the S5800/S5820X to a security zone except the internal interface.

In this example, Create internal security zone Inside add GigabitEthernet 1/0/15 to the internal security

zone, as shown in

Figure 9. Create external security zone Outside and add GigabitEthernet 1/0/16 to

the external security zone in the same way.

Figure 9 Create a security zone

GigabitEthernet1/0/15

# Configure a segment.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 84 85

No comments

H3c-technologies H3C SecBlade IPS Cards User Manual Page 23