H3c-technologies H3C SecBlade IPS Cards User Manual download pdf (Page 14)

Activating licenses

Activating on an IPS device (not for SecPath

T5000-S3)

Step1 Connect the devices and log in to the IPS device.

• Use a crossover Ethernet cable to connect the network interface of the PC to the default Ethernet

management interface of the IPS device. By default, the IP address of the default Ethernet

management interface is 192.168.1.1. Configure the IP address of the PC, 192.168.1.2 in this

example. Make sure the devices can reach each other.

• Copy the activation file to the PC.

• Launch an IE browser and enter https://192.168.1.1 in the address bar. The login page shown in

Figure 10 appears. Type the username admin, the password admin, the verify code, and click Login.

To set the display language to English, click English.

Figure 10 Login page

Step2 Select System Management > Device Management > License from the left navigation tree to enter the

license configuration page in

Figure 11.

1 2 ... 9 10 11 12 13 14 15 16 17 18

No comments

H3c-technologies H3C SecBlade IPS Cards User Manual Page 14