H3c-technologies H3C S5120 Series Switches User Manual download pdf (Page 710)

100

101

1-4

To do… Use the command… Remarks

Enter system view

system-view

—

Configure the specified ports as

stack ports

stack stack-port

stack-port-num port

interface-list

Required

By default, a port is not a stack

port.

After a device joins a stack and becomes a slave device of the stack, the prompt changes to

<stack_n.Sysname>, where n is the stack number assigned by the master device, and Sysname is the

system name of the device.

Logging In to the CLI of a Slave from the Master

In a stack, you can log in to the CLI of a slave device from the master device and perform configurations

for the slave device.

Follow the step below to log in to the CLI of a slave device from the master device:

To do… Use the command… Remarks

specified slave device from the

master device

stack switch-to member-id

Required

Available in user view

The stack switch-to command is used to log in to the CLI of a slave device from the master with the

user level being unchanged. To return to the master device, use the quit command.

Displaying and Maintaining Stack Configuration

To do… Use the command… Remarks

Display the stack information of

stack members

display stack [ members ] Available in any view

Stack Configuration Example

Network requirements

z Switch A, Switch B, Switch C, and Switch D are connected with one another.

1 2 ... 705 706 707 708 709 710 711 712 713 714 715 ... 744 745

Comments to this Manuals

No comments

H3c-technologies H3C S5120 Series Switches User Manual Page 710

Comments to this Manuals

Related products and manuals for Routers H3c-technologies H3C S5120 Series Switches