H3c-technologies H3C S6300 Series Switches User Manual Page 129
- Page / 306
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
116
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Enable the NQA server.
nqa server enable
By default, the NQA server
is disabled.
3. Configure a TCP or UDP
listening service.
• TCP listening service:
nqa server tcp-connect ip-address
port-number [ tos tos ]
• UDP listening service:
nqa server udp-echo ip-address
port-number [ tos tos ]
You can specify the ToS
value in the IP packet
header of NQA probe
packets. The default ToS
value is 0.
Enabling the NQA client
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Enable the NQA client.
nqa agent enable By default, the NQA client is enabled.
Configuring NQA operations on the NQA client
NQA operation configuration task list
Tasks at a glance
(Required.) Configure at least one of the NQA operations:
• Configuring the ICMP echo operation
• Configuring the DHCP operation
• Configuring the DNS operation
• Configuring the FTP operation
• Configuring the HTTP operation
• Configuring the UDP jitter operation
• Configuring the SNMP operation
• Configuring the TCP operation
• Configuring the UDP echo operation
• Configuring the voice operation
• Configuring the DLSw operation
• Configuring the path jitter operation
(Optional.) Configuring optional parameters for the NQA operation
(Optional.) Configuring the collaboration function
(Optional.) Configuring threshold monitoring
(Optional.) Configuring the NQA statistics collection function
(Optional.) Configuring the saving of NQA history records
- H3C S6300 Switch Series 1
- Preface 3
- GUI conventions 4
- Symbols 4
- Network topology icons 4
- Port numbering in examples 5
- Documentation feedback 6
- Obtaining documentation 6
- Technical support 6
- Contents 7
- Ping example 14
- Tracert 16
- Prerequisites 17
- Tracert example 17
- System debugging 19
- Command 20
- Remarks 20
- Configuring NTP 21
- NTP architecture 22
- Association modes 23
- NTP security 25
- Enabling the NTP service 26
- Total sessions : 1 60
- Configuring SNTP 61
- SNTP configuration example 63
- Configuring PTP 65
- PTP domain 66
- Clock node and PTP port 66
- Synchronization mechanism 67
- Request_Response 68
- Peer Delay 69
- Configuring clock nodes 70
- Specifying a PTP standard 71
- Specifying a PTP domain 72
- Enabling PTP on a port 79
- Offset from master : 0 (ns) 81
- Offset from master : N/A 84
- Overview 85
- Log destinations 86
- Log formats 87
- Saving logs to the log file 93
- Managing security logs 94
- <Device> system-view 98
- [Device] info-center enable 98
- [Device] quit 98
- UNIX log host 99
- Network requirements 100
- Configuration procedure 100
- Configuring SNMP 102
- SNMP operations 103
- Protocol versions 103
- Configuring SNMP logging 108
- Enabling SNMP notifications 109
- Configuration prerequisites 110
- Displaying the SNMP settings 112
- SNMPv3 configuration example 114
- Configuring RMON 116
- Event group 117
- Alarm group 117
- Private alarm group 117
- Protocols and standards 118
- Configuring NQA 126
- Collaboration 127
- Threshold monitoring 127
- NQA configuration task list 128
- Configuring the NQA server 128
- Enabling the NQA client 129
- Threshold types 142
- Triggered actions 143
- Reaction entry 143
- Configuring the DNS template 147
- Configuring the TCP template 148
- number ] 150
- Configuring the FTP template 151
- NQA configuration examples 153
- Verifying the configuration 172
- Configuring port mirroring 178
- Local port mirroring 179
- Remote port mirroring 179
- XGE1/0/1 180
- XGE1/0/2 180
- [DeviceA] vlan 10 192
- [DeviceA-vlan10] quit 192
- Configuring flow mirroring 193
- Configuring a QoS policy 194
- Applying a QoS policy 194
- Configuring sFlow 198
- Configuring flow sampling 199
- Configuring counter sampling 200
- Monitoring kernel threads 204
- ] [ verbose ] 205
- ] [ verbose ] [ slot 206
- ] [ verbose ] 206
- Configuring EAA 207
- Elements in a monitor policy 208
- EAA environment variables 209
- User-defined variables 210
- Configuring a monitor policy 211
- Suspending monitor policies 214
- Configuration examples 214
- Configuring CWMP 217
- Basic CWMP functions 218
- How CWMP works 219
- Configuration task list 220
- Enabling CWMP from the CLI 221
- Configuring ACS attributes 222
- Configuring CPE attributes 223
- CWMP configuration example 227
- Configuring the DHCP server 236
- Configuring NETCONF 238
- NETCONF message format 239
- How to use NETCONF 239
- FIPS compliance 240
- Enabling NETCONF over SOAP 240
- Enabling NETCONF over SSH 241
- Exchanging capabilities 242
- Subscription procedure 242
- Locking the configuration 245
- Unlocking the configuration 245
- Saving the configuration 255
- Loading the configuration 255
- Filtering data 257
- CLI operation example 262
- Returning to the CLI 265
- Appendix 267
Related products and manuals for Routers H3c-technologies H3C S6300 Series Switches
(18 pages)
(14 pages)© 2020, manymanuals.com. All rights reserved. | 0.044 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals