H3c-technologies H3C S5560 Series Switches User Manual Page 256
- Page / 321
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
222
Tasks at a
g
lance
(Required.) Configuring the network-side port
Enabling ARP snooping
Enable ARP snooping for the original VLANs and the translated VLANs.
To enable ARP snooping:
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Enter VLAN view.
vlan vlan-id N/A
3. Enable ARP snooping.
arp snooping enable
By default, ARP snooping is disabled.
For more information about ARP
snooping commands, see Layer 3—IP
Services Command Reference.
Configuring the customer-side port
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Enter Layer 2 Ethernet
interface view.
interface interface-type
interface-number
N/A
3. Set the link type of the port.
• Configure the port as a trunk
port:
port link-type trunk
• Configure the port as a hybrid
port:
port link-type hybrid
By default, the link type of a port is
access.
4. Assign the port to the original
VLANs and the translated
VLANs.
• port trunk permit vlan
vlan-id-list
• port hybrid vlan vlan-id-list
tagged
N/A
5. Configure a many-to-one
VLAN mapping.
vlan mapping uni { range
vlan-range-list | single vlan-id-list }
translated-vlan vlan-id
By default, no VLAN mapping is
configured on an interface.
Configuring the network-side port
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Enter Layer 2 Ethernet
interface view or Layer 2
aggregate interface view.
• Enter Layer 2 Ethernet interface
view:
interface interface-type
interface-number
• Enter Layer 2 aggregate
interface view:
interface bridge-aggregation
interface-number
N/A
- H3C S5560-EI Switch Series 1
- Preface 3
- Symbols 4
- Network topology icons 4
- GUI conventions 4
- Port numbering in examples 5
- Obtaining documentation 6
- Technical support 6
- Documentation feedback 6
- Contents 7
- S5560-30F-EI switches) 16
- { Accepts the packet 22
- Configuration guidelines 25
- Step Command Remarks 31
- Task Command 31
- Configuring a null interface 33
- Bulk configuring interfaces 35
- Overview 37
- Types of MAC address entries 38
- Configuring MAC Information 52
- Basic concepts 56
- Operational key 57
- Configuration types 57
- Link aggregation modes 58
- Choosing a reference port 58
- LACP functions 60
- LACP operating modes 60
- LACP priorities 60
- LACP timeout interval 61
- Edge aggregate interface 63
- Step Command Remarks 67
- Ethernet link aggregation 77
- Configuring port isolation 91
- STP protocol packets 94
- Basic concepts in STP 95
- Description 96
- Example of STP calculation 98
- STP timers 102
- MSTP features 103
- MSTP basic concepts 104
- Regional root 106
- Common root bridge 106
- Port roles 106
- How MSTP works 107
- Protocols and standards 108
- STP configuration task list 109
- RSTP configuration task list 110
- PVST configuration task list 111
- MSTP configuration task list 112
- Configuring an MST region 113
- Configuration procedure 118
- Configuring edge ports 119
- Configuration example 123
- Performing mCheck 127
- Configuring Digest Snooping 128
- Network requirements 129
- <DeviceB> system-view 130
- Configuration prerequisites 131
- Configuring TC Snooping 132
- Enabling BPDU guard 134
- Enabling root guard 134
- Enabling loop guard 135
- Enabling TC-BPDU guard 137
- Enabling BPDU drop 137
- MSTP configuration example 138
- Verifying the configuration 141
- PVST configuration example 142
- Configuring loop detection 146
- Loop detection interval 147
- Loop protection actions 147
- Enabling loop detection 148
- Configuring VLANs 154
- Configuring port-based VLANs 157
- Configuring MAC-based VLANs 161
- Configuring a VLAN group 169
- VLAN configuration examples 170
- Configuring super VLANs 179
- Untagged ports: 184
- Configuring the private VLAN 185
- [DeviceB] vlan 5 189
- [DeviceB-vlan5] quit 189
- Configuring voice VLANs 202
- IP phone access methods 204
- Voice VLAN assignment modes 205
- Configuring MVRP 217
- Join message 218
- New message 218
- Leave message 218
- MRP timers 219
- MVRP registration modes 220
- MVRP configuration task list 220
- Enabling MVRP 221
- Configuring MRP timers 222
- Enabling GVRP compatibility 223
- MVRP configuration example 224
- Configuring QinQ 235
- QinQ implementations 236
- Restrictions and guidelines 237
- Enabling QinQ 237
- Configuring the CVLAN TPID 239
- Configuring the SVLAN TPID 239
- QinQ configuration examples 241
- Configuring VLAN mapping 246
- Distribution 247
- VLAN mapping implementations 248
- Network-side port 249
- Customer-side port 249
- Uplink traffic 249
- Downlink traffic 249
- One-to-two VLAN mapping 250
- Two-to-two VLAN mapping 250
- Two-to-two VLAN 251
- Configuration task list 253
- Enabling DHCP snooping 253
- Enabling ARP detection 253
- Enabling ARP snooping 256
- Configuring LLDP 267
- LLDP frame formats 268
- LLDPDUs 269
- Working mechanism 272
- LLDP configuration task list 274
- Enabling LLDP polling 276
- LLDP configuration examples 284
- Verify the configuration: 285
Related products and manuals for Routers H3c-technologies H3C S5560 Series Switches
(291 pages)
(39 pages)© 2020, manymanuals.com. All rights reserved. | 0.039 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals