H3c-technologies H3C S5120 Series Switches User Manual download pdf (Page 46)

Figure 46 S5120-28C-PWR-EI (PoE+ model) fear panel

(1) RPS power input (2) AC power input

(3) Grounding screw (4) Interface card slot 1 (MOD1)

(5) Interface card slot 2 (MOD2) (6)

PoE+ label

Figure 47 S5120-28C-PWR-EI (PoE model) rear panel

(1) RPS power input (2) AC power input

(3) Groundin

screw (4) Interface card slot 1

(MOD1)

(5) Interface card slot 2 (MOD2)

NOTE:

The S5120-28C-PWR-EI is shipped with the two expansion interface card slots covered by filler panels.

You can select one or two interface cards for your switch as needed. For the interface cards available for

the S5120-EI Switch Series, see "Interface cards." For how to install an

interface card, see "Installing and

removing an interface card."

S5120-52C-PWR-EI

S5120-52C-PWR-EI includes two models: PoE and PoE+.

• The front panels of the PoE and PoE+ models are the same in appearance. See Figure 48.

• T

he PoE+ model has a PoE+ label on its rear panel, as shown in Figure 49. T

he maximum PoE power

per port is 30 W.

• The PoE model has no PoE+ label on its rear panel, as shown in Figure 50. T

he maximum PoE power

per port is 15.4 W.

For more information about the PoE power supply, see Table 8.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 62 63

No comments

H3c-technologies H3C S5120 Series Switches User Manual Page 46