H3c-technologies H3C MSR 800 User Manual download pdf (Page 22)

Figure 16 Installing a WLAN antenna

Connecting interface cables

Connecting an Ethernet cable to a copper port

Because fixed Ethernet ports support MDI/MDIX autosensing, you can use either a straight-through

cable or a crossover cable for connection.

To connect an Ethernet cable:

1. Connect one end of the cable to an Ethernet port on the router.

2. Connect the other end of the cable to the peer device.

3. Examine the port LED status. For more information, see "LED description."

Figure 17 Connecting th

e router to a computer

Connecting optical fibers to a fiber port

ARNING!

To avoid injury to your eyes, do not stare at the optical fiber interfaces and optical fiber connectors

hen connectin

optical fibers.

IMPORTANT:

• Use only H3C-certified transceiver modules.

• Ensure a minimum curvature radius of 10 cm (3.94 in) for the optical fibers.

To connect optical fibers to a fiber port:

1. Remove the dust plug from the fiber port.

2. Insert a transceiver module to the fiber port, as shown in callout 2 of Figure 18.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 40 41

No comments

H3c-technologies H3C MSR 800 User Manual Page 22